Report item
Item specifics
  • Power: Low Power
  • Name: Waveshare
  • Frequency: Low Frequency
  • Type: SCM
  • Model Number: CC Debugger
  • Category: Debugger and Programmer for CCxxxx devices
  • Supported Devices 1: CCxxxx RF System-on-Chip (SoC) devices
  • Supported Devices 2: CCxxxx RF transceivers
  • Supported Devices 3: CC85xx devices with PurePath Wireless Configurator
  • Supported Software 1: IAR Embedded Workbench For C8051
Product Description

Supported Software 2:SmartRF Flash Programmer
Supported Software 3:SmartRF Studio
Supported Software 4:SmartRF Packet Sniffer
Supported Software 5:SmartRF Packet Sniffer
Place of Origin:Guangdong, China (Mainland)

Debugger and Programmer for CCxxxx RF System-on-Chip (SoC) devices, CCxxxx RF transceivers, and CC85xx devices with PurePath Wireless Configurator
 

Description

The CC Debugger is primarily used for debugging and programming the flash on CCxxxx 8051-based System-on-Chip (SoC) devices from . CC Debugger also supports CCxxxx RF transceivers. In addition, CC Debugger is used for configuring the CC85xx devices with PurePath Wireless Configurator.

 

Key Features

  • Performance
    • Compatible with the original TI CC Debugger
    • Supported Operating Systems: Windows 2000, Windows xp sp2/sp3, Windows Vista 32bit, Windows 7 32bit
    • Target voltage: 1.2V~3.6V
    • Capable of powering the target board from the debugger
    • Operating temperature: 0~85(centigrade)
  • Supported Software
    • IAR Embedded Workbench For C8051
    • SmartRF Flash Programmer
    • SmartRF Studio
    • SmartRF Packet Sniffer
    • PurePath Wireless Configurator
  • Connects to PC
    • Computer connection via USB interface
  • Connects to target board
    • Target board connection via 10-pin IDC connector (2x5 2.54mm pitch). The figure below shows the header pinout:

aeProduct.getSubject()

 

Supported Devices

  • Programming and debugging the following 8051-based system-on-chips from :
    • CC1110, CC1111
    • CC2430, CC2431
    • CC2510, CC2511
    • CC2530, CC2531, CC2533
    • CC2540, CC2541
    • CC2543, CC2544, CC2545
  • Controlling the following transceivers from SmartRF Studio:
    • CC1120, CC1121, CC1125, CC1175
    • CC1101, CC110L, CC113L, CC115L
    • CC2520
  • Configuring the CC85xx devices with PurePath Wireless Configurator:
    • CC8520, CC8521
    • CC8530, CC8531

 

LED Status

  • OFF: The debugger has no power or there is no valid firmware on the debugger.
  • AMBER (BOTH LEDS ON): The debugger is powered, but there is no valid firmware.
  • RED LED BLINKING: The Debugger is in Boot Recovery Mode.
  • RED LED ON: No device detected. This might be due to old firmware on the CC Debugger, or a problem with the hardware connection (make sure the target board is properly powered and connected correctly).
  • GREEN LED ON: The target device has been properly detected. It is possible to start programming/debugging.

 

Package Contains

  1. CC Debugger × 1
  2. USB cable × 1
  3. 10-pin flat cable × 1
  4. User Guide CD × 1

aeProduct.getSubject()

Terms & Conditions


1. Payment:
* We accept Escrow as the payment method. Currently, you can pay by Visa, MasterCard and bank transfer. For more information about making payment, please go to \\\\\\\'Escrow FAQ\\\\\\\' to get more details. escrow.aliexpress.com/escrow-faq/payment/what-payment-methods-can-i-use.html

2. Shipping:
* We ship items to Worldwide!
* Please make sure that your shipping address is 100% correct.
* All items will be shipped within 48 working hours on receipt of cleared payment.
* We\\\\\\\'ll add a tracking number after sending the item so that you can track your parcel.

3. Returns Policy:
* We are happy to return any unused item in its original packaging within 14 days of delivery.
* Buyers are responsible for the round(two-way) shipping cost.

4. Feedback:
* We\\\\\\\'ll leave POSITIVE FEEDBACK on receipt of cleared payment.
* If you\\\\\\\'re satisfied with the item and our service, please leave POSITIVE FEEDBACK, it\\\\\\\'s important to us.
* Once any problems occured, please contact us first. We\\\\\\\'ll try our best to work things out.

Please feel free to contact us for any questions, on trademanager, or send message to me. If you need to adjust the total price, pls contact us in advance. It\\\\\\\'s our pleasure to serve you! We appreciate your business!!

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.