Report item
Item specifics
  • Power: Low Power
  • Name: Waveshare
  • Frequency: Low Frequency
  • Model Number: CC2530 Eval Kit4
Product Description
ZigBee development/evaluation kit designed for CC2530F256

Overview

CC2530 Eval Kit4 is a ZigBee development/evaluation kit designed for CC2530F256, consists of the mother board ZB600 and the ZigBee moduleXCore2530. LCD and modules are also included.


ZB600 Features

  • Onboard battery holder, multi power supplies are available
  • All the IOs are accessible for easy expansion
  • Integrates CP2102 for debugging
  • LEDs and user keys
  • Onboard sensor interface, supports connecting various sensors

What\\\\\\\'s on the ZB600

aeProduct.getSubject()

  1. ZigBee module connector: for easily connecting ZigBee modules
  2. 8I/Os+ADC interface
  3. SPI+UART interface
  4. Debugging interface
  5. USB interface: USB to UART via the onboard convertor CP2102
  6. LCD interface
  7. Sensor interface: for connecting sensors like Temperature sensor, Humidity sensor, Gas sensor, or Flame sensor, etc.
  8. MCU pins connector: all the MCU pins are accessible on expansion connectors for further expansion
  9. ONE-WIRE interface
  10. 5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
  11. Power indicator
  12. Serial port RX/TX indicator
  13. User LEDs
  14. Power switch
  15. CP2102
  16. AMS1117-3.3
  17. Reset button
  18. User key
  19. Joystick: five positions
  20. UART0 jumper
  21. User LED jumper
  22. User key and Joystick jumper

XCore2530 Features

  1. As easy to use as any UART modules
  2. Preloaded Bootloader, supports programming via UART directly without any debugger
  3. Provided firmware: Coordinator and/or Router(preloaded by default)
  4. Supports configuring via upper computer software
  5. Auto networking (at least 1 Coordinator and 1 Router are required)
  6. Onboard power amplifier RXF2401, achieves farther communication distance

XCore2530 Specifications

  1. Onboard chip: CC2530F256RHAR
  2. Communication distance:
    • Absolute maximum: over 1500 meters
    • Stable communication: over 1300 meters
    • Auto connecting: over 1000 meters (open and wide operating environment)
  3. Frequency range: 2.4GHz
  4. Wide supply-voltage range (2 V-3.6 V)
  5. Operating temperature: 40C ~ 85C
  6. Serial port baud rate: 38400bps (default), different baud rates are available by software configuration
  7. Dimension: 26mm x 37mm (PCB)
  8. Expansion pinheader: all the I/Os except P1_1, P1_4
  9. Pinheader pitch: 2.54mm
  10. Spacing between pinheaders on the left side and the right side: 22.86mm (9x2.54mm)
  11. Antenna: 2.4G 2DB 360 omni-directional

CC2530F256RHAR Features

  1. Frequency range: 2.4GHz
  2. 16 transfer chains, software configurable according to environmental conditions
  3. Radio baud rate up to 250kbps
  4. High-Performance and Low-Power 8051 microcontroller core with code prefetch
  5. 2.4-GHz IEEE 802.15.4 compliant RF transceiver
  6. Wide supply-voltage range (2 V-3.6 V)
  7. Watchdog timer, battery monitor, and temperature sensor
  8. 12-Bit ADC with 8 channels and configurable resolution
  9. 2 powerful USARTs with support for several serial protocols
  10. IR generation circuitry
  11. General-Purpose timers (One 16-Bit, Two 8-Bit)
  12. AES security coprocessor
  13. 21 General-Purpose I/O pins (19 × 4 mA, 2 × 20 mA)

Photos

aeProduct.getSubject()

Package Contains

  1. ZB600 x 1
  2. XCore2530 x 1
  3. 2.2inch 320x240 Touch LCD (A) x 1
  4. AT45DBXX DataFlash Board x 1
  5. Analog Test Board x 1
  6. DS18B20 x 1
  7. Antenna x 1
  8. USB type A to Mini-B cable x 1
  9. 4-pin 2-pin wires pack x 1
aeProduct.getSubject()

Downloads

Development resources: demo codes, schematic, datasheets, etc.
wvshare.com/downloads/accBoard/CC2530_ZB600_ZB600.7z

Terms & Conditions

aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()

aeProduct.getSubject()

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.