Report item
Item specifics
  • Brand Name: Adeept
Product Description


This is an Ultrasonic Distance Sensor Starter Learning kit for Raspberry Pi. The kit contains more than 150 components and electronic modules,these components can be divided into about 25 species.We have carefully prepared a guidebook(more than 113 pages guide book of PDF)and supporting experimental code routine for you to learn. The guide book includes 18 experiments,and the code is divided into two versions(C and Python).

If you want to learn the basics of electronics and Linux programming, this kit is a wonderful choice for you.In the process of learning this kit, you will get perfect technical support. By learning  this kit, you will be fully aware of the wonderful world of electronics and the fun of DIY.

We will send you all the files(schematic,code,learning lessons,specification,etc) to your email address when you get the board. Please contact us by email if you need it urgently. We also provide technical support. We are glad to solve the problem you meet when you use this kit.

The guide book content as follows:

About the Raspberry Pi    
Raspberry Pi Pin Numbering Introduction    
Raspberry Pi GPIO Library Introduction    
How to Use wiringPi and RPi.GPIO    
Lesson 1 Blinking LED    
Lesson 2 Active Buzzer    
Lesson 3 Tilt Switch    
Lesson 4 Controlling an LED by Button    
Lesson 5 Relay    
Lesson 6 LED Flowing Lights    
Lesson 7 Breathing LED    
Lesson 8 Controlling an RGB LED with PWM    
Lesson 9 7-Segment Display    
Lesson 10 4-Digit 7-Segment Display    
Lesson 11 LCD1602    
Lesson 12 A Simple Voltmeter    
Lesson 13 Measuring Distance    
Lesson 14 Photoresistor    
Lesson 15 Thermistor    
Lesson 16 Controlling an LED Through LAN    
Lesson 17 DC Motor    
Lesson 18 How to Control A Servo

Package include:

Note: does not include the Raspberry Pi board.

1x DC Motor
1x Servo
1x Relay
1x Ultrasonic distance sensor
1x Ultrasonic distance sensor holder
1x L9110 motor driver
1x LCD1602
1x ADC0832
1x 74HC595
1x 7-Segment Display
1x 4-bit 7-segment display
1x Light Sensor (Photoresistor)
1x Analog Temperature Sensor (Thermistor)
1x 40 pin GPIO Extension Board
1x 40 pin GPIO Cable
1x Breadboard Power Supply Module
1x Active Buzzer
1x Tilt switch
2x Switch
4x Red LED
4x Green LED
4x Yellow LED
4x Blue LED
16x Resistor(220Ω)
10x Resistor(1kΩ)
5x Resistor(10kΩ)
4x Capacitor (104)
2x Capacitor (10uF)
4x Button (large)
4x Button (small)
1x Button cap (red)
1x Button cap (white)
2x Button cap (blue)
2x NPN Transistor (8050)
2x PNP Transistor (8550)
2x 1N4148 Diode
2x 1N4001 Diode
2x Potentiometer (10KΩ)
1x Breadboard
40x Male to Male Jumper Wires
20x Male to Female Jumper Wires
1x Header (40pin)
1x Band Resistor Card
1x Project Box

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.38kg (0.84lb.)
  • Package Size: 17cm x 7cm x 5cm (6.69in x 2.76in x 1.97in)
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.38kg (0.84lb.)
  • Package Size: 17cm x 7cm x 5cm (6.69in x 2.76in x 1.97in)
We support the following payment methods. All payments made on AliExpress are processed by Alipay.