Report item
Item specifics
  • is_customized: yes
Product Description

product

_

 

DESCRIPTION

 

JY-926 Multi coin acceptor

accept 1-6 kinds of coin

You can program up to 6 kinds of coin

 

2467

 

 

 

DESCRIPTION

  •  Intelligent CPU software control, and high accuracy
  • Self-programming without PC, and automatic self-test for proble
  •  Accept different kinds of coins at the same time. Free to set up pulses\' output
  •  Prevent not only electric shock but also electromagnetic interference
  • Support multi coins with only 1 signal output
  • Capable of accepting all worldwide Coins and Token

CONNECTIONA AND SWITCHES

SETTING FOR COINS

  1. Hold on the button"ADD" and the button "MINUS" simultaneously for seconds,then letter "A" will appear from the LED display.
  2. Hold on the button "SET" for seconds, and letter "E" will appear. Next, use the button "ADD" and the button "MINUS" to choose how many kinds of coins you would like to use. Next, hold on the button "SET" for seconds to finish.
  3. Letter "H1" will appear. Use the button "ADD" and the button "MINUS" to choose how many samples you would like to insert later. Next, hold on the button "SET" for seconds to finish.
    The maximum is 30. Please choose more than 15 samples for more accurate.
  4. Letter "P1" will appear. Use the button "ADD" and the button "MINUS" to choose the amount of output\'s signals/pulses for coins. Next, hold on the button "SET" for seconds to finish. 
    The maximum pulse is 50.
  5. Letter "F1" will appear. Use the button "ADD" and the button "MINUS" to choose accuracy. Next, hold on the button "SET" for seconds to finish.
    The value is from 1 to 30, and 1 is the most accurate. Normally,5-10 is fine. If kinds of coins are too similar, the value should be more accurate.
  6. The first kind of coin has been set up so far. Please repeat No.3- No.5 until all kinds of coins has been set up. Letter "A" will appear again after all above procedures is finished.
  7. Hold on the button " SET" for seconds, and letter "E" will appear. Finally, turn off and turn on the power. The setting will be saved.

Sampling FOR COINS

You can start sampling after the setting is finished. Please choose more than 15 coins. The sampling will affect the accuracy of coin selector.

----------------------------------------------------------------------------------------------------

  1.  Hold on the button "SET" for seconds, then letter "A1" will appear from the LED display.
  2. Please start to sample the first kind of coins. The letter "A1" will appear again after finished.
  3. Hold on the button "SET" for seconds, then letter "A2" will appear. Next, please start to sample second kind of coins. The letter "A2" will appear again after finished.
  4. Please repeat No.3 until all kinds of coins you need is set up.
    If you already set up all kinds of coins you need, and it is less than the product has, please turn off power. For example: If you choose "6-kind-of-coin of multi-coin selector" to set up 4 types of coins, please turn off power after you see second “A4”.
  5. The system will restart automatically after finished.
  6. The product can be used after finishing sampling.

AP MODE

  • Using this mode, you are able to control the output pulse ratios.
    For example: 2 coins for 1 pulse or 3 coins for 1 pulse.
  • If you don\'t need to use AP mode, please skip AP mode setting.
    -----------------------------------------------------------------------------------------------

SETTING FOR AP MODE

  1.  Please hold on the button "SET" and the button "ADD" simultaneously for seconds, then hold on the button "SET" for seconds to get into AP mode
  2. Please select the value of AP mode. The coin selector will generate 1 external signal output when the internal signal- "P" value of parameter- reaches the value
  3. The default value of AP mode is 1.

 

size

10

content

 

  • product

     

    DESCRIPTION

    • Free to choose value for using
    • Free to adjust rate for output
      BL7001BL7002

    -

    • Please choose currency based on following table:

volume Control board

DSC07435DSC07436DSC07437DSC07434DSC07438DSC07439DSC07440DSC07441

 

 

 

  • Free to connect Bill acceptor and coin acceptor or other device with pluse
  • Free to set up, value, and coin mode
  • Free to connect 2 hoppers for changing

 

Function Introduction

  • Free to connect to coin acceptor, bill acceptor, and card reader
  • Warning sound or LED sign when devices are not functional
  • Control electronic power by count.

Connection and Position

1: Display       2: White lead      4: Pause for mode 01:02                    
5: Output: Control first solenoid valve   
6: Output: Control second solenoid valve
7: Input devices-coin acceptor, bill acceptor, or card reader:
    YELLOW: DC12V, WHITE: input signal, BLACK: GND
8: AC jack-5.5mm*2.1mm       
9: output 5V when first device is not functional
10: Input: To flow sensor for No.6      
11: Input: To flow sensor for No.7  
12: button START for MODE 01:01     
13-16: Button S4, S3, S2, and S1
 

      Please reference to attached 2 for connection example

 

Time and Value Setting

1.     Please press button S4, 01:-- shows up. Please use button S1 and S2 to adjust OPERATING MODE.
OPERATING MODE: 01:01 power on devices without pushing button.
                   01:02 power on devices with pushing button from No.13.

2.     Please press button S4, 02:-- shows up. Please use button S1 and S2 to adjust VALUE for NO.6.

3.     Please press button S4, 03:-- shows up. Please use button S1 and S2 to adjust VALUE for NO.6.

4.     Please press button S4 to finish.

Detailed Function

l   Operating Mode 01:02:
PAUSE: -User need to pushes START button from No.13 within 1 minute after pushing pause button.
       - Reset and remove balance if device has not powered on after 1 minute.
LED Light from No.13: Lights when balance is available for changing.
                    blinks when it is pausing..

l   The order for deducting balance: if No.6 and NO.7 are active, balance is from NO.6 to No.7

l   Warning signature:
 If balance is available for power on devices and the devices are not functional after 10 seconds:
-  No.10 output 5V and GND for LED sign.
-  Display shows --:E2
-  Warning sound for error until pushing button S3.
   Power off and on can not remove warning unless pushing button S3.

 
   

 

 

 

  • Free to connect Bill acceptor and coin acceptor or other device with pluse
  • Free to set up, value, and coin mode
  • Free to connect 2 motors
  • warning sound when it is out of water
  • Free to connect button for START and PAUSE
  • If user push pause, power is cut off for 1 minute and button START flashes. User push button START again for continuing running.

 

Function Introduction

  • Free to connect to coin acceptor, bill acceptor, and card reader
  • Warning sound or LED sign when devices are not functional
  • Control electronic power by count.

Connection and Position

1: Display       2: White lead      4: Pause for mode 01:02                    

5: Output: Control first solenoid valve   
6: Output: Control second solenoid valve

7: Input devices-coin acceptor, bill acceptor, or card reader: YELLOW: DC12V, WHITE: input signal, BLACK: GND

8: AC jack-5.5mm*2.1mm       

9: output 5V when first device is not functional

10: Input: To flow sensor for No.6      

11: Input: To flow sensor for No.7 

12: button START for MODE 01:01    

13-16: Button S4, S3, S2, and S1

 

Time and Value Setting

1.     Please press button S4, 01:-- shows up. Please use button S1 and S2 to adjust OPERATING MODE.
OPERATING MODE: 01:01 power on devices without pushing button.
                   01:02 power on devices with pushing button from No.13.

2.     Please press button S4, 02:-- shows up. Please use button S1 and S2 to adjust VALUE for NO.6.

3.     Please press button S4, 03:-- shows up. Please use button S1 and S2 to adjust VALUE for NO.6.

4.     Please press button S4 to finish.

Detailed Function

l   Operating Mode 01:02:
PAUSE: -User need to pushes START button from No.13 within 1 minute after pushing pause button.
       - Reset and remove balance if device has not powered on after 1 minute.
LED Light from No.13: Lights when balance is available for changing.
                    blinks when it is pausing..

l   The order for deducting balance: if No.6 and NO.7 are active, balance is from NO.6 to No.7

l   Warning signature:
 If balance is available for power on devices and the devices are not functional after 10 seconds:
-  No.10 output 5V and GND for LED sign.
-  Display shows --:E2
-  Warning sound for error until pushing button S3.
   Power off and on can not remove warning unless pushing button S3.

 

 
   

4-size-

 1/2" copper solenoid valve - Type:1-80℃

DSC07178DSC07179DSC07180DSC07181DSC07182DSC07183DSC07184DSC07185

size

Flow sensor

DSC07191DSC07193DSC07194DSC07195DSC07200DSC07201DSC07202DSC07206

size-E

Power supply

DSC06742DSC06743DSC06744DSC06744_DSC06745DSC06746DSC06747size

Example for Connection

138

 

 

image

PURCHASE NOTES

Warranty

- We accept return in 7 days after buyer receive the goods. Buyer pay for the fore and back shipping charge if it is not seller’s mistake. In the unlikely event that item can not work well, seller pay for the fore and back shipping charge for a new one or issue buyer refund.
- For “any type of BOX”, we DO NOT accept return. In the unlikely event that there is a problem, seller sends parts to buyer for replacing.
- 1 year warranty.
Shipping
POST
- Tracking number is provided after sending and available for tracking 3 days later. 
   please inform us if the tracking number is not trackable after 3 days.
- Tracking website: tracking website
- To United States, we send by e-pocket. For RUSSIA, please provide FULL NAME for sending. To Argentina, we don’t send goods.
 EXPRESS
- Usually, The local customs charges tax when goods arrive at local customs. Please double check if it is ok before choosing express.
  Every country has different RATE FOR TAX. Please check rule with your customs.
- Some countries we send by DHL, some countries, we send by FEDEX. If you are insisted in SPECIFIC EXPRESS WAY, please inform
us on order page. 
- To  RUSSIA, we only send by DHL or EMS, customer need to have ability to do clearance. 
 
Other information
We will declare low value for you. If you need us to declare real value, please inform us on order page.
Please note clear speciation on order page for items, like COLOR, SIZE, etc. or it may be picked up by random.
- If we need any information to confirm with you, we will send message on order page. Please pay attention on it before sending goods.
Feedback
- We appreciate if you leave the feedback after you test your goods.
- Please communicate with seller when you have questions instead of leaving feedback directly or open a dispute. We will provide suggestions in 24 hours after you send message to us.
- If you have any questions, please let us know. We will reply to you in 24 hours.

 

Packaging Details
  • Unit Type: piece
  • Package Weight: 2.0kg (4.41lb.)
  • Package Size: 10cm x 9cm x 4cm (3.94in x 3.54in x 1.57in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 2.0kg (4.41lb.)
  • Package Size: 10cm x 9cm x 4cm (3.94in x 3.54in x 1.57in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.