Report item
Item specifics
  • Brand Name: DFRobot
  • is_customized: yes
  • Model Number: FT245 EVAL BOARD
  • Demo Board Type: Others
  • Overview: USB TO 8-BIT FIFO
  • Features: FT245, ATtiny2313(MCU), USB port, LED port, Controlling port
  • Resources: User Guide CD, USB Driver etc.
  • MCU device: ATtiny 2313
  • Place of Origin: Guangdong, China (Mainland)
Product Description

Your order is under $8, we unified send China Post Ordinary Small Packet Plus.
There is no tracking information, usually arrived in your country is 40-70 days, we don\\\'t accept the dispute,
If you don\\\'t wait, it is recommended that the purchase order is more than $8,

Your order is more than $8, we unified make arrangements for your China Post Registered Air Mail,
Have a tracking number query information, general arrived in your country is 25 to 50 days,
Please after receipt of the goods, the products in a 5 star evaluation, thank you for your understanding,

Evaluation Board Based on FT245, A High-performance Cost-effective Solution for USB TO 8-BIT FIFO


The FT245 EVAL BOARD provides a high-performance cost-effective solution for USB TO 8-BIT FIFO. It is based on the FT245RL chip and will hopefully allow to try out the full potential of the FT245 device before using it in your prototype.

What\\\\\\\'s on board


* Powered from USB bus or external power supply

* USBPWRJMP: jumper for selecting USB or external power supply source, short it for USB and open it for external

* VCC, GND pin headers

* Voltage level is configurable via on-board jumper, VCC or 3.3V

Onboard Chips

* FT245RL, USB to parallel FIFO interface device

* ATtiny2313, 8-bit AVR Microcontroller with 2K Bytes In-System Programmable Flash


* USB connector

* 6-pin ISP programming port

Human to Machine Interface

* 8 data displaying LEDs


* WR_EN, RD_EN: Read/Write enable port, which is connected to MCU pins

* TEST_WR, TEST_RD#: Read/Write test port, which is connected to MCU pins

* Controlling port of the FT245 are connected to pin headers, convenient for development


The FT245RL is a USB to parallel FIFO interface device which simplifies USB to FIFO designs and reduces external component count by fully integrating an external EEPROM, USB termination resistors and an integrated clock circuit which requires no external crystal, into the device. It has been designed to operate efficiently with a USB host controller by using as little as possible of the total USB bandwidth available.

* Functional Integration.

* Asynchronous Bit Bang Mode.

* Synchronous Bit Bang Mode.

* FTDIChip-ID.

* High Output Drive Option.

* Programmable FIFO RX Buffer Timeout.



1. User Guide CD (CD with software, drivers, and examples)

2. USB Driver (FTDI\\\\\\\'s royalty-free Virtual Com Port (VCP) driver, Direct (D2XX) driver)

3. Examples (AVR MCU controlling examples in C)

4. Schematic (Designed by using PROTEL99, and providing IMG format or Protel SchDoc format)

5. Datasheet PDF of Related Chips

Package Contains


2. USB Cable

3. 4-pin wire x 2

4. 2-pin wire x 2

5. User Guide CD

Terms & Conditions

1. Payment:
* We accept Escrow as the payment method. Currently, you can pay by Visa, MasterCard and bank transfer. For more information about making payment, please go to \\\\\\\'Escrow FAQ\\\\\\\' to get more details.

2. Shipping:
* We ship items to Worldwide!
* Please make sure that your shipping address is 100% correct.
* All items will be shipped within 48 working hours on receipt of cleared payment.
* We\\\\\\\'ll add a tracking number after sending the item so that you can track your parcel.

3. Returns Policy:
* We are happy to return any unused item in its original packaging within 14 days of delivery.
* Buyers are responsible for the round(two-way) shipping cost.

4. Feedback:
* We\\\\\\\'ll leave POSITIVE FEEDBACK on receipt of cleared payment.
* If you\\\\\\\'re satisfied with the item and our service, please leave POSITIVE FEEDBACK, it\\\\\\\'s important to us.
* Once any problems occured, please contact us first. We\\\\\\\'ll try our best to work things out.

Please feel free to contact us for any questions, on trademanager, or send message to me. If you need to adjust the total price, pls contact us in advance. It\\\\\\\'s our pleasure to serve you! We appreciate your business!!

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 20cm x 18cm x 10cm (7.87in x 7.09in x 3.94in)
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 20cm x 18cm x 10cm (7.87in x 7.09in x 3.94in)
We support the following payment methods. All payments made on AliExpress are processed by Alipay.