Report item
Item specifics
  • is_customized: NO
Product Description





This is an electronic load board of very high cost performance, adopting two completely independent 18 bit ADC chip, 15 PPM voltage benchmark, which allows a high accuracy. It is better than other electronic load with single chip built-in AD sampling digital tube display or battery capacity tester. Supporting user second correction of parameters, it is a best choice for DIY users.



  • 1602 LCD screen, display information comprehensively.
  • Configuration of 9cm CPU fan, very quiet.
  • With temperature display, supporting the discharge and voltage setting.
  • Test all kinds of power load or burn-in, can also test capacity of battery discharge.
  • Load maximum power 150W, max voltage 60V, max current 10A.



Voltage: DC 12V±5%
Load Type: Constant current
Load Voltage: 0.5-60V
Load Current: 0-10A
Max Power: 150W
Voltage Reading Precision: ±(0.1%+0.05%FS)
Current Reading Precision: ±(0.2%+0.1%FS)
Constant Current Accuracy: Current reading precision + 1d
Noise: 25dD(A) 

Weight: 341g(approx.)



1, Power: DC 12V, load power and power supply should be 2 independent power.
2, Power on and screen shows "Welcome to use" which means equipment is normal
3, Press "set" to move the cursor, add and subtract operations according to the cursor position. When the cursor position is at "I" or "V", press add and subtract button to switch voltage and current setting.
4, Connect to power source that need to be tested, do not connect incorrectly of polarity.
5, Press "start" button to start/stop electronic load, at the same time, the screen shows "ON" or "OF"
6, Press "start" button more than 1 second to reset AH and time, at the same time power off the electronic load (if it\'s powered on)
7, The lower left corner will display information that automatic switching by default every 2 seconds between power, AH, temperature, time. Press and hold "set" button, then press "add" button to switch, and the display information will not switch automatically.  If you need the information to switch automatically again, press and hold "set" button, then press "subtract" button till lower right screen corner shows "Auto".
8, Settings will be automatically saved after power down. Need to be manually started when power is back.
9, Maximum power rate of load of continuous operation is associated with room temperature. When temperature is too high, operation power rate should be reduced. If the heat sink temperature reaches 87 ℃, the load will automatically reduce the power rate. When the core temperature reaches 91 ℃, it will stop work, and need to be manually started after cooling.
10, Load current will be automatically adjusted according to the input voltage. For example, if set 10A, and the input voltage is 20V, then it automatically change the actual current to 7.5A(150W/20V), even it still displays 10A.
11, Reset first if need statistics of AH and time. It has been accumulating by default, will not automatically reset, and can only be reset manually.



1, Power supply and load testing power supply must be independent, otherwise it may lead to uncontrollable load or other unpredictable situation.
2, If the load is already started and then connect with test power, you need to assess whether power rate is secure. For example, if set 10A and start load, then connect to 60V power source, the instantaneous power rate can reach 600W, which can probably damage power tube. Although the load current can adjusted automatically, but it need reaction time (about 0.02 second). So when you are not sure if it is secure, you can connect it to test power supply first, and the machine will automatically calculate the largest secure current. For example, when the maximum voltage is 60V, the secure current is 2.5 A. If you set the current above 2.5A, it will work at 2.5A.
3, Connect positive and negative of test power supply wrongly will cause short circuit, and  if the current is too large, power tube may be damaged. Avoid reverse connection, please.
4, Users need to have some knowledge of circuit.
5, Suggest to power on the machine before connecting with test power supply or test batteries.


Package Includes:
1 x Electronic Load


Guarantee & Returns

1. All merchandise we sell are in good quality and under examination before they are shipped. We will try our best to avoid any quality problem.

2.If there are some workmanship or material defects with the products, please contact us firstly , we will exchange it or offer other solutions for you to make a choice. 

3.The shipping and handling charge is not refundable and customer should be responsible for all the charges of returning and reshipping. All return items must be in good condition. They must be under resalable condition. Man-made defects are not guaranteed, such as broken, scratched and so on. Thanks for understanding and cooperation!

1. We will send the parcels within 2 working days (except Saturday and Sunday) after buyer\'s payment is verified by Aliexpress according to the shipping method you chose or more reliable and faster ways under extraordinary circumstances. We will leave a message to tell the tracking number after we ship the goods to you. 

2. If you have any requirements on the goods description and declared value in the shipping receipt (commercial invoice),pls leave us a message after payment. 



1. Customer satisfaction is very important to us. If you are satisfied with our products, please take time to leave us a positive feedback. Your encouragement will keep us moving forward and constantly improving our service. 

2. If you are not satisfied with the item you ordered, don\'t worry, pls contact us first, we will solve the problem for you in time. Think we can resolve any dispute through friendly negotiations.


Packaging Details
  • Unit Type: piece
  • Package Weight: 0.35kg (0.77lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.35kg (0.77lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
We support the following payment methods. All payments made on AliExpress are processed by Alipay.