Report item
Item specifics
  • Brand Name: Adeept
Product Description

For this kit you can get:

(1) A bulk of components, electronic modules that are common-used during UNO R3 Learning.

(2) Learning lessons, with circuits, code,explanation,etc.

(3) Technical support


About This Kit:

This is a RFID Starter Leaning Kit for UNO R3,this kit contains more than 50 kinds of different electronic components, more than 180 components are included. With this kit ,we will take you from knowing to utilizing ,you are able to do more experiment , get your more idea into real action without the restriction of hardware and software , and we have carefully prepared a guide book (110 pages guide book of PDF) and supporting experimental code routine for you, including a total of 25 experiments.we believe with this hardware + software support , you are able to become expert programmer ( developer ) very soon . so don\'t wast time , just get this kit , and start your project right away ! 

The guide book content as follows: 

About Arduino    
About Processing    
Lesson 1 Blinking LED    
Lesson 2 Active Buzzer    
Lesson 3 Controlling an LED by a Button    
Lesson 4 Controlling Relay    
Lesson 5 Serial Port    
Lesson 6 LED Flowing Lights    
Lesson 7 LED Bar Graph Display    
Lesson 8 Breathing LED    
Lesson 9 Controlling an RGB LED by PWM    
Lesson 10 Playing Music    
Lesson 11 LCD1602 Display    
Lesson 12 7-segment Display    
Lesson 13 A Simple Counter    
Lesson 14 Dot-matrix Display    
Lesson 15 Controlling a Servo    
Lesson 16 Photoresistor    
Lesson 17 Measuring Temperature by a Thermistor    
Lesson 18 IR Remote Controller    
Lesson 19 Temperature & Humidity Sensor DHT-11    
Lesson 20 Ultrasonic Distance Sensor    
Lesson 21 3-axis Accelerometer—ADXL345    
Lesson 22 4x4 Matrix Keypad    
Lesson 23 Controlling DC motor    
Lesson 24 PS2 Joystick    
Lesson 25 A Simple Voltmeter    
Lesson 26 RFID module 

Arduino and processing interactive lessons:
Lesson 27 Move a cat    
Lesson 28 Control the brightness of a photo with a photoresistor    
Lesson 29 Controlling the 3D Model by PS2 Joystick    
Lesson 30 The Brick Games

Component List:

1x  Adeept UNO Board(Arduino UNO) 

1x  RC522 RFID Module 

1x  RFID ID Round Tag

1x  RFID ID Card

1x  Ultrasonic distance sensor 

1x  ADXL345 Acceleration Sensor 

1x  servo 

1x  Joy stick 

1x  IR receiver HX1838 

1x  Remote controller 

1x  Dot-matrix display 

2x  74HC595 

1x  DHT-11 Temperature and Humidity Sensor 

1x  DC Motor 

1x  L9110 motor driver 

1x  Relay 

1x  LCD1602 

1x  7-Segment Display 

1x  Four-digit segment display 

1x  Active buzzer 

1x  Passive buzzer 

2x  Thermistor 

2x  Photoresistance 

1x  LED bar graph 

1x  4*4 Matrix keyboard 

2x  Switch 

1x  RGB LED 

8x  Red LED 

2x  Green LED 

2x  Yellow LED 

2x  Blue LED 

16x Resistor(220Ω) 

10x Resistor(1 kΩ) 

5x  Resistor(10 kΩ) 

5x  Capacitor(104) 

2x  Capacitor(10uF) 

4x  Button(large) 

4x  Button(small) 

1x  Button cap(red) 

1x  Button cap(white) 

2x  Button cap(blue) 

2x  NPN Transistor(8050) 

2x  PNP Transistor(8550) 

2x  Potentiometer(10KΩ) 

2x  1N4148 Diode 

2x  1N4001 Diode 

1x  Battery holder

1x  Breadboard 

1x  USB Cable 

40x Male to Male Jumper Wires 

20x Male to Female Jumper Wires 

3x  Female to Female Jumper Wires 

1x  Header(40pin) 

1x  Band Resistor Card 

1x  Project Box

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.555kg (1.22lb.)
  • Package Size: 20cm x 10cm x 5cm (7.87in x 3.94in x 1.97in)
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.555kg (1.22lb.)
  • Package Size: 20cm x 10cm x 5cm (7.87in x 3.94in x 1.97in)
We support the following payment methods. All payments made on AliExpress are processed by Alipay.