Report item
Item specifics
  • Brand Name: DFRobot
  • high resolution: 1024*600
  • touch control: Resistive touch control
Product Description

Your order is under $8, we unified send China Post Ordinary Small Packet Plus.
There is no tracking information, usually arrived in your country is 40-70 days, we don\'t accept the dispute,
If you don\'t wait, it is recommended that the purchase order is more than $8,

Your order is more than $8, we unified make arrangements for your China Post Registered Air Mail,
Have a tracking number query information, general arrived in your country is 25 to 50 days,
Please after receipt of the goods, the products in a 5 star evaluation, thank you for your understanding,

Waveshare Newest 10.1inch HDMI LCD 1024*600 Resistive Touch Screen Display for Raspberry Pi Zero/A+/B/ B+/2 B/3 Model B

10.1inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi


  • 1024×600 high resolution
  • Resistive touch control
  • Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
  • HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
  • Back light control to lower power consumption



1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 NC NC
6, 9, 14, 20, 25 GND Ground
19 TP_SI SPI data input of Touch Panel
21 TP_SO SPI data output of Touch Panel
22 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
23 TP_SCK SPI clock of Touch Panel
26 TP_CS Touch Panel chip selection, low active

External Dimension


Development Resources

Wiki :


Why the LCD doesn\\\'t work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.
Why the LCD still doesn\\\'t work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Which power supply should I use?
It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC\\\'s USB port might have not enough power to support the Pi and LCD.

For more info, please check the wiki page.


Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They\\\'re usually some poor copies of our early hardware revisions, and comes with none support service.

To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:

RPi LCD Anti-Piracy
(Click to enlarge)

Note :
Pi 3B = Raspberry Pi 3 Model B
If the LCD is intended to play videos, please choose the one with HDMI display interface for better experience.

Have a look :


  1. 10.1inch HDMI LCD x 1
  2. HDMI connector x 1
  3. Touch pen x 1
  4. RPi screws pack (4pcs) x 1
  5. DVD × 1

Terms & Conditions

1. Payment:
* We accept Escrow as the payment method. Currently, you can pay by Visa, MasterCard and bank transfer. For more information about making payment, please go to \\\'Escrow FAQ\\\' to get more details.

2. Shipping:
* We ship items to Worldwide!
* Please make sure that your shipping address is 100% correct.
* All items will be shipped within 48 working hours on receipt of cleared payment.
* We\\\'ll add a tracking number after sending the item so that you can track your parcel.

3. Returns Policy:
* We are happy to return any unused item in its original packaging within 14 days of delivery.
* Buyers are responsible for the round(two-way) shipping cost.

4. Feedback:
* We\\\'ll leave POSITIVE FEEDBACK on receipt of cleared payment.
* If you\\\'re satisfied with the item and our service, please leave POSITIVE FEEDBACK, it\\\'s important to us.
* Once any problems occured, please contact us first. We\\\'ll try our best to work things out.

Please feel free to contact us for any questions, on trademanager, or send message to me. If you need to adjust the total price, pls contact us in advance. It\\\'s our pleasure to serve you! We appreciate your business!!

Packaging Details
  • Unit Type: piece
  • Package Weight: 1.05kg (2.31lb.)
  • Package Size: 25cm x 20cm x 10cm (9.84in x 7.87in x 3.94in)
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 1.05kg (2.31lb.)
  • Package Size: 25cm x 20cm x 10cm (9.84in x 7.87in x 3.94in)
We support the following payment methods. All payments made on AliExpress are processed by Alipay.